▶

The Repipe Cast · Episode 01

What a Repipe Really Costs in Orlando

0:00 / 0:001x

The cost to repipe a house is the price of replacing all of a home's water supply lines at once, and it depends on four things: the size of the home, the number of bathrooms and fixtures, the pipe material you choose, and how hard the old pipes are to reach. According to Angi's 2026 national cost data, whole house repipes range from roughly $1,500 for very small jobs to $15,000 for large or complex homes, with most homeowners landing near the middle of that range.

Orlando and Central Florida homes have their own cost dynamics, and this guide explains exactly what moves the number up or down so you can read any quote with confidence. Shamrock Plumbing has completed more than 80,000 repipes across Orlando and Central Florida since 2003, so the factors below come from decades of local project experience, not national averages alone.

What Determines Repipe Cost in Orlando?

Four variables set the price of every repipe. Understanding them explains why two neighbors can get very different quotes for what sounds like the same job.

• Home size and fixture count. More square footage means more pipe, and every bathroom, kitchen, laundry hookup, and outdoor spigot adds supply runs. A two-bath single-story home is a fundamentally smaller project than a three-bath two-story home.
• Pipe material. PEX and copper are the two materials used in modern repipes, and the choice is the single biggest price lever.
• Access and construction type. Most Orlando and Central Florida homes sit on slab-on-grade foundations with original supply lines running under or through the concrete. A modern repipe reroutes new lines overhead through walls and attic space instead of tunneling through the slab.
• Restoration scope. Reaching pipes means opening walls. Whether drywall patching is included in the quote, and to what finish level, changes the total.

PEX vs Copper: How Material Changes the Price

PEX (cross-linked polyethylene) is flexible plastic piping that resists the two things that destroy pipes in Orlando and Central Florida: chlorinated municipal water and mineral-heavy water. It installs faster, requires fewer wall openings, runs quieter, and costs less. It is the material most Orlando repipes use today.

Copper is the traditional rigid metal option. It is time-tested and preferred by some homeowners, but it costs more in both material and labor, and industry data consistently shows copper repipes running roughly double the cost of comparable PEX projects. Shamrock installs both materials and recommends the right one for your home's construction, water conditions, and budget. For the full project breakdown, see our whole house repiping service page.

What Should an Orlando Repipe Quote Include?

A complete repipe quote covers five things, and you should confirm each one in writing before comparing prices:

• The permit and inspection. Whole house repiping in Orlando and across Orange and Seminole Counties requires a plumbing permit and a county inspection. If a quote skips permitting, that is a warning sign, not a savings.
• All supply lines and shutoff valves. The full run from the main shutoff to every fixture, with new stops at each one.
• Pressure testing before walls close. The new system should pass inspection while everything is still visible.
• Drywall repair. Planned access openings should be patched as part of the project scope. Quotes that exclude wall repair look cheaper up front and cost more by the end.
• The workmanship warranty. Shamrock backs repipes with a workmanship warranty, and any contractor you consider should tell you exactly what theirs covers.

Shamrock provides transparent, upfront pricing on every repipe, which means the number you approve is the scope you get: permits, inspection, and wall repair included, reviewed with you before work begins.

Why Do Orlando Homes Need Repiping in the First Place?

The Orlando and Central Florida housing stock is the reason repiping is such a common project here. Tens of thousands of homes built in the region between the late 1970s and mid 1990s were plumbed with polybutylene, a gray plastic pipe that degrades from the inside out when exposed to chlorinated water. Failures show up as recurring pinhole leaks, and some insurers now decline or non-renew coverage on homes that still have it. Older homes may also have galvanized steel lines that corrode and choke water pressure over time.

If you are seeing rusty water, falling pressure, or repeat leaks, start with our leak detection service to confirm what is happening, or read about plumbing repairs if the issue is isolated to one fixture. When leaks keep coming back, each repair is money spent delaying a repipe that is already necessary.

Does Insurance or Financing Help With Repipe Cost?

Homeowners insurance generally treats repiping as maintenance rather than a covered loss, so policies typically pay for sudden water damage a failed pipe causes, not the planned replacement of the pipes themselves. Every policy is different, so confirm details with your insurer. What is increasingly common in Orlando and Central Florida is the reverse pressure: insurers requiring polybutylene replacement as a condition of coverage or renewal.

Financing is where most homeowners find flexibility. Shamrock offers financing options that spread the cost of a repipe into manageable payments, which turns an unplanned four-figure project into a predictable monthly number. Ask about current options when you schedule your assessment.

Can I save money by combining projects?

Yes. A repipe is the most efficient moment to handle related work because the system is already open and the crew is already on site. The most common pairing is a water heater replacement, since an aging tank connects directly to the lines being replaced. If your main line from the meter shows its age, water line replacement can be scoped in the same project. Bundling avoids paying twice for setup, access, and restoration.

Quick Assessment

When was your home built?

Orlando and Central Florida homes built before the mid 1990s often still have their original supply lines.

Before 1995 1995 to 2005 After 2005

Quick Assessment

Have you had a pipe leak in the past two years?

Recurring pinhole leaks are the clearest sign a supply system is failing as a whole.

More than one One None

Quick Assessment

Do you have gray plastic pipes, or has insurance raised your plumbing?

Gray polybutylene pipe and insurer non-renewal notices are direct repipe indicators.

Yes, one or both Not sure what pipe I have No, neither

Quick Assessment

How is your water pressure and water color?

Falling pressure and discolored water point to corrosion narrowing your lines from the inside.

Low pressure or rusty water Occasionally inconsistent Strong and clear

SCHEDULE SERVICE

or learn about our repipe process →

Frequently Asked Questions